If you wanted to emulate the dead center of the analog stick, it is possible to stick a resistor in there had have it read as the dead center. I'm having a hard time finding out the resistance value for the analog stick on PS2, but if it's a 10K ohm potentiometer, you can put a 5K ohm resistor in the circuit and it will read in as the center. If it's 100k, use 50k, and vice versa. I'm not sure on how the wiring is done on the GH contoller, but it seems like there is either no resistor, or a resistor that's under 5K wired in (if it was over 5K, it'd be going to the right). It's not difficult to put in a switch that can choose which resistor to use. |