Bemanistyle [dot] com Forums - View Single Post - How do i Map Buttons and Controls for Stepmania?

MdX MaxX · 01-20-2008, 03:44 PM

1) Plug in the controller
2)Start Stepmania
3)Go into optiong and go to config key/joy mapping
4)Go to a blank (--------) for the command you want to configure, and press enter. Then, press the button on the controller. Do this for every command.

For example, if you want to program Left, go to a blank (----------) next to Left, and press enter. Then press left on the controller. Hope this helps.

01-20-2008, 03:44 PM	#2
MdX MaxX Underage Technology Addict MdX MaxX is offline Join Date: Jun 2006 Location: Fayetteville, Georgia MdX MaxX's Collection Posts: 1,035 Marketplace Rating: 0	1) Plug in the controller 2)Start Stepmania 3)Go into optiong and go to config key/joy mapping 4)Go to a blank (--------) for the command you want to configure, and press enter. Then, press the button on the controller. Do this for every command. For example, if you want to program Left, go to a blank (----------) next to Left, and press enter. Then press left on the controller. Hope this helps. __________________ My YouTube Channel In the Groove: IIDX edition (Released!) If you can't read my username, STOP USING INTERNET EXPLORER.