Unscrew the bottom base, separate carefully.
Remove the rubber face by the pegs. It won't come completely off, but that's okay.
Just clean the face and corners a bit, and flatten along if need be. At this point, if the corner sensors are a bit too loose, you could use a really small amount of non-corrosive glue, preferably Gorilla Glue.
Let it dry, then pull the rubber pegs back through the sides and close/screw back in. SHOULD be working again.
__________________
Brawl Friend Code: 4468-0647-9801 PM me if you've added me, but I have probably already added you beforehand.
|