Anyone can play well with "Tatakon" here

madbikes · 05-03-2008, 02:21 PM

Anyone can play well with the "tatakon" here? I'm not sure... it doesn't seem to work well for me. Is there a way to make it more sensitive?

flyboy87 · 05-03-2008, 04:53 PM

Dr. MechaGai can help

*MechaGai* · 05-03-2008, 07:46 PM

Play on it really hard for a week, then come back if things don't improve.

That'll be $100. Check accepted.

squall23 · 05-04-2008, 02:46 AM

My problem is still trying to make it not move around and I've already had it for 10 months! I can make it move less by puting it on the carpet but that's still not good enough. Any ideas.

flyboy87 · 05-04-2008, 08:57 AM

I use cellophane and stick it on a permanent surface in front of the TV. Works wonders.

*MechaGai* · 05-04-2008, 10:04 AM

I've already suggested putting heavy objects around it, and also VELCRO. HOLY GOD THAT'S SOME GOOD STUFF RIGHT THERE. It's really cheap in hardware stores.

flyboy87 · 05-05-2008, 09:01 AM

Does anyone here know how to fix a non sensitive V2 Tatakon?

It's not sensitive on the upper right. (Left KAT)

*MechaGai* · 05-05-2008, 06:50 PM

Unscrew the bottom base, separate carefully.

Remove the rubber face by the pegs. It won't come completely off, but that's okay.

Just clean the face and corners a bit, and flatten along if need be. At this point, if the corner sensors are a bit too loose, you could use a really small amount of non-corrosive glue, preferably Gorilla Glue.

Let it dry, then pull the rubber pegs back through the sides and close/screw back in. SHOULD be working again.