I have an old Ransai PNM ASC from years ago that I want to sell as it has some issues and I have a DAO now anyway.
The paint on the case isn't the greatest anymore and some of the little plastic guys on the bottom have come off, no big deal, easy to replace. It is equipped with the lights setup but I don't have the AC adapter any longer (it also takes D batteries). I have no reason to believe that the lights don't work but I don't know as I can't test it.
Main issue is that there is some ground connection that must be loose as all the buttons work or none of them work while playing (intermittent). The buttons work great for a short bit but I guess the hitting of the buttons causes the loose ground connection to have an issue and then none of them work. I had taken all the buttons out and cleaned and dried them and I looked at the wiring but I couldn't see where the issue is with it. The wiring is soldered to the microswitches, there are no quick disconnects on this one. If you're handy with this sort of thing, this would be easy to fix, or you could always get a PCB from DJ DAO and switch to that.
The buttons are perfect and the case looks good still, this could be a good controller for someone, it just needs a little work. I don't think the problem is with the PCB because at times all the buttons work great.
I'm looking to get $100 plus shipping (you'll only pay the actual shipping cost). If I can't get at least $100 for this, then it's not worth it for me to sell and I'll just hang onto it (I've had it for many years now). Here are some links to pictures...
Far Pic 1 Far Pic 2 Far Pic 3 Close Up Pic 1 Close Up Pic 2 Close Up Pic 3
I have some auctions up at EBay and you can see my feedback there (same ID as this forum). I didn't want to put this up on EBay as it doesn't work completely, so I figured I'd try my luck here.
FS: Ransai PNM ASC 
