TT help, I don't take criticism well

[Mix Ma$ta']

So my Turntable is too sensitive, when spun quickly, instead of scrolling quickly on menus, it recognizes it as a quick change in direction. When in gameplay, if a quick scratch is applied, it registers twice. This isn't awesome, so I'd like to fix it.

I've tried the following:

1) blowing air around the optical sensor
2) Tightening the screw (this helps with preventing a fast spin, but it still occurs, and makes playing harder)
3) checking the board to see if any of the solder points were connected to other ones.


I've built about 7 of these, they use KOC turntables and identical parts, and no problems on the ones I made before, this one is just being stubborn. The problem has nothing to do with the customization.
So my Turntable is too sensitive, when spun quickly, instead of scrolling quickly on menus, it recognizes it as a quick change in direction. When in gameplay, if a quick scratch is applied, it registers twice. This isn't awesome, so I'd like to fix it.
http://tiger.towson.edu/~pdebor1/IMG_2275.jpg

[m335h73r of PBJ]

keepin' it civil.

[word]

Buy a new turntable/sensor.

[eureka1]

Use a KoC.

[Mix Ma$ta']

Also, my thread title used to say "If you can't help, don't post" but apparently that wasn't "civil" enough for someone with the name "NiggasSlamminWhiteBitches" how ironic.

Back on topic, this controller is simply a KOC, with buttons modded. the TT is EXACTLY the same, i took a KOC and put it in a box, you can still see the same TT sticker. new TT sensors cannot be purchased, and another KOC might be the only option if I don't get any help.

So basically, pretend that isn't the controller:

If you had a KOC, and your TT was doing this, how would you go about fixing it?

[word]

Originally Posted by Mix Ma$ta'

If you had a KOC, and your TT was doing this, how would you go about fixing it?

Buy a new one.

[my58vw]

WTF ^^^

[PURPLE STRiKER]

thats all there is to do. once the TT goes out you cant fix it (at least no one on bms knows). you would know this if you searched.

[m335h73r of PBJ]

Have you tried checking the connections from the cord to the TT leads? I mean if you tried checking the connection from the sensor to the leads and that led to nothing maybe the problem is in the cord and not the sensor.

And if you want, I have a USKOC TT that has no keypad that I could toss your way for hellsa cheap.

[Mix Ma$ta']

Originally Posted by NiggasSlamminWhiteBitches

Have you tried checking the connections from the cord to the TT leads? I mean if you tried checking the connection from the sensor to the leads and that led to nothing maybe the problem is in the cord and not the sensor.

And if you want, I have a USKOC TT that has no keypad that I could toss your way for hellsa cheap.

Yeah I tried this, everything actually looks really good. I can't find anything out of the ordinary (or different from the other controllers I have).

I'm thinking it might be cable that goes to the ps2. It looks like a couple of pins might not be making good contact. I might try going to gamestop and picking up a crappy PS1 controller and just putting the wires into that connector.

That moment where I'd have to cut the iidx controller cable though will be quite epic.

Thanks for the offer, I might have to take you up on it. I'll post results here soon