Anyone know where to get AC Adapter for Ransai?

Securis · 03-01-2009, 04:29 PM

My pop'n con has the ability to use AC power for the lights, but the person I bought it from had lost the adapter. Does anyone know where I can get one?

Thanks

Alex · 03-01-2009, 09:38 PM

All you'll need is a 12VDC adapter that fits the plug. I'm unsure what kind you have, since I think Ransais had different adapters at different times, but as long as it's 12VDC and fits, it will work fine.

Worst case scenario, replace both the adapter and the plug at the same time. That's what I did essentially when I ditched my battery clips.

Securis · 03-01-2009, 10:23 PM

Alright, thanks.

EDIT: What is a good search for ebay? I keep coming up with just converters.

Thanks again!

Alex · 03-01-2009, 11:19 PM

"12V AC adapter" should get you some hits, or you can try checking on an electronic parts site like Mouser.

Securis · 03-02-2009, 11:12 AM

I'm sorry, didn't you say it had to be 12V DC?

Alex · 03-02-2009, 05:24 PM

It'll work anyway. They're just lights, so they're not too picky about what kind of current they're getting.

Catastrophy · 03-10-2009, 08:54 AM

I have a couple of these:

AC-DC Power Adapter - Switch Selectable Voltage PSU03RUSA

Makes sure I can plug in to common female connections.

Dara-G. · 03-26-2009, 08:54 AM

If you would rather go to a store bring your controller to a radioshack. I know they have 12vdc adapters. Bring controller so they can size up the right plug. It will probably be around 20-25$ depending how much current you get but its a universal tip that goes on the end of it. So they should have something for you.