Turn table is very slow in SSRMAX

[Isolated]

well, I'm using a super dual box 2 and it works actually very well except that the turn table is extremely laggy. every other button is fine. Is this a common problem? and/or is there a way to fix it? Is the common problem dealing with lag on all buttons? or is the turntable the one people get lag with?

[Amp Divorax]

1. What type of KOC are you using?

2. Do you spin it in the same direction or do opposite directions?

3. Have you changed your USB Polling Rate?

[R26Otacon]

Wtfizzle is the USB polling rate and how do i change that O.O

[Isolated]

I have not changed the polling rate just yet, I use the US controller and I do infact turn in opposite directions. I'll go up first, then down, then up....etc.

[kuniokun]

Works a little better if you just set the ClockWise and Counter-CC disc to both be set to left scratch. Kinda like using the shift button exclusively for scratch when playing keyboard.
Or just buy a radio shack usb adapter as i've heard is soooo good.

[Isolated]

what happens is the turntable will stay activated for like a couple seconds after hitting it, and sometimes won't activate at all.

[MagnetGenocide]

Yeah I have the same prob too. So all i have to do is go to the button config and set it to left side only????